In this section, you can access to the latest technical information related to the FUTURE project topic.

Corrosion Crack Morphology and Creep Analysis of Members Based on Meso-Scale Corrosion Penetration

In this paper, to study the development of load-carrying capacity and long-term creep performance of reinforced concrete beams under different corrosion patterns, the rate-dependent model of concrete is used as the basis to consider the creep development process from the meso-scale level. The porosity mechanics method is used to simulate the generation and penetration process of corrosion products. Three corrosion conditions are set: bottom longitudinal reinforcement corrosion, top longitudinal reinforcement corrosion and all reinforcement corrosion. The corrosion rate is used as the variable in each corrosion condition. The results show that: (1) the greater the corrosion rate in all conditions, the lower the bearing capacity. In addition, the corrosion of top longitudinal reinforcement causes the damage form of the beam to change to brittle damage; (2) the creep coefficient decreases with the increase in corrosion rate in all working conditions, but the main factor for this phenomenon is the obvious increase in initial deformation. Consequently, it is not suitable to follow the conventional creep concept (deformation development/initial deformation) for the development of plastic deformation of damaged members. It is more reasonable to use the global deflection to describe the long-term deformation of corrosion-damaged members.

» Author: Bin Zeng

» Reference: doi: 10.3390/ma15207338

» Publication Date: 20/10/2022

» More Information

« Go to Technological Watch



AIMPLAS Instituto Tecnológico del Plástico

C/ Gustave Eiffel, 4
(València Parc Tecnològic) - 46980
PATERNA (Valencia) - SPAIN

PHONE

(+34) 96 136 60 40

EMAIL

Project Management department - Sustainability and Industrial Recovery
life-future-project@aimplas.es