In this section, you can access to the latest technical information related to the FUTURE project topic.

Wear Performance of Circular Shim against Cam in Engine Bench Test

Unlike the conventional engine, the valve train of a certain type of engine uses a circular shim instead of a tappet to wear against the cam. To verify the reliability of the shim, an engine bench test was used to test its wear performance. The total duration of the bench test was 1000 h, which was divided into three stages. In each stage, the test equipment was stopped, and the shims were disassembled to observe the surface morphology during the worn process. Precious long-term data were obtained. With the extension of the bench test time, weight loss increased. The maximum weight loss occurs 1000 h after worn, which is about twice that of 350 h. During the wear process, a plastic flow of material was found on the subsurface, and fatigue wear marks occurred on the surface. With an increase in test time, the wear marks increased, leading to material spalling and the formation of pits. The wear mechanism was the mixed wear of fatigue wear and adhesive wear.

» Author: Cheng-Di Li

» Reference: doi: 10.3390/ma15186293

» Publication Date: 10/09/2022

» More Information

« Go to Technological Watch



AIMPLAS Instituto Tecnológico del Plástico

C/ Gustave Eiffel, 4
(València Parc Tecnològic) - 46980
PATERNA (Valencia) - SPAIN

PHONE

(+34) 96 136 60 40

EMAIL

Project Management department - Sustainability and Industrial Recovery
life-future-project@aimplas.es