In this section, you can access to the latest technical information related to the FUTURE project topic.

Development of a two-component structural adhesive for bonding of metals and polymeric composites

To minimize the structure distortion and potential de-bonding in adhesive bonding of dissimilar materials (e.g., metals and polymeric composites), a two-component (2 K) low temperature cure modified adhesive consisting of 93.5 wt.% commercial Henkel 5089 adhesive, 2.5 wt.% N-(2-Hydroxyethyl) ethylenediamine (AEEA) and 4.0 wt.% 2-ethyl-4-methylimidazole (2,4-EMI) was formulated. Experimental results showed that the use of the modified adhesive lowered the curing temperature from recommended 177 °C (for 20 min) for Henkel 5089 to 100 °C (for 20 min) or 120 °C (for 10 min) for AA6061-AA6061 joint, and 120 °C (for 20 min) or 130 °C (for 10 min) for AA6061-Cf/PA6 (Nylon 6) and Cf/PA6-Cf/PA6 joints, respectively, due to the faster curing reaction caused by the combined addition of AEEA and 2,4-EMI. It took 5, 3, and 2 days to cure the adhesive-bonded AA6061-AA6061, AA6061-Cf/PA6, and Cf/PA6-Cf/PA6 joints made with the modified adhesive and cured at ambient temperature, respectively. In addition, the modified adhesive had sound working life (5 hours) at ambient temperature. The static strengths of all adhesive-bonded AA6061-AA6061, AA6061-Cf/PA6, and Cf/PA6-Cf/PA6 joints with the modified adhesive were hardly affected by thermal exposure cycle (i.e., exposure to 82 °C for 30 min). These results indicated that the modified adhesive possesses the promising characteristics for joining of similar and dissimilar materials.

» Author: Sheng-Nan Wang, Yuan Li, Yi-Min Guo, Bin Cai, Guo-Peng Zhang, Zhong-Xia Liu, Pei-Chung Wang

» Reference: 10.1016/j.ijadhadh.2019.01.018

» Publication Date: 23/01/2019

» More Information

« Go to Technological Watch



AIMPLAS Instituto Tecnológico del Plástico

C/ Gustave Eiffel, 4
(València Parc Tecnològic) - 46980
PATERNA (Valencia) - SPAIN

PHONE

(+34) 96 136 60 40

EMAIL

Project Management department - Sustainability and Industrial Recovery
life-future-project@aimplas.es